INSTRUMENT CALIBRATION

♦♦ We provide quality instrument calibration serviceswith high accuracy master equipment’s, trained personnel and adhere to environmental conditions.

♦♦ We provide quality instrument calibration serviceswith high accuracy master equipment’s, trained personnel and adhere to environmental conditions.

♦♦ We ensure that our calibration services can form the strong basis of your Quality Assurance system.

♦♦ It is the standardization of a measuring instrument. It is achieved by a set of operations that relate the values / quantities indicated by the measuring instrument against an accurate traceable standard in order to determine any deviation and correct the same for errors.

♦♦ We are using high Accuracy Instruments and highly sophisticated measuring instruments to provide very good accurate services by deputing our well-trained and qualified calibration team with Master Equipment’s and calibration is performed in the environmental condition

♦♦ Magi Tex calibration is prominent in SITE CALIBATION BYOUR CALIBRATION UNIT with our equipment’s and instruments whose accuracy will be carefully maintained by us. While we calibrate your instruments at site, our calibration services will not affect the production unit in any way any industry, whether in manufacturing or service sector, must have accurate and reliable measurements if they are to achieve their quality and safety goals.

♦♦ We have the latest instruments, standards, knowledge and skills to calibrate Metrology i.e. Dimensions, Thermal, RPM, Mechanical, Thermal Technical, Analytical, High Volume Sampler. Our standards have traceability to national / international standards, so the customers can be assured as to the accuracy of their instrument.

♦♦ Our Master Equipment’s are calibrated periodically at NABL Accredited Laboratory.

♦♦ Magi Tex was certified ISO 9001:2015 Quality Management System.

CALIBRATION STANDARD FOLLOWEDCALIBRATION STANDARD FOLLOWED
♦♦ ISO/IEC: 17025:2017
ON SITE CALIBRATION
♦♦ All over India
CALIBRATION SERVICES
♦♦ Mechanical Measurements Electro-Technical Measurements ThermalMeasurements Optical Measurements
♦♦ TRAINING SERVICES
Magi Tex provides effective training services for Garment Lab Instruments

♦♦ Mechanical Instruments Training

♦♦ Electro-Technical Instruments Training

♦♦ Thermal Instruments Training

♦♦ Optical Instruments Training

♦♦ Garment Lab Testing &Training
Example: Button snap pull Machine, Needle Detector Machine and Measuring Tape.

MAJOR SPECIALIZATION IN CALIBRATION LIST
♦♦ Dimensional Calibration 0 to 5000 mm

♦♦ Dimensional Calibration 0 to 300 mm

♦♦ Mass Weights Calibration 1mg to 200 gm

♦♦ Force Calibration 1gm to 300 kg

♦♦ Optical Lux meter Calibration 0 to 2,00,000Lux

♦♦ Humidity Chamber Calibration 10 percent Rh to 99 percent Rh

♦♦ Temperature Calibration -200°C to 1370°C

♦♦ Temperature Chamber Calibration 0°C to 70°C

♦♦ Time & Frequency Calibration 0.1 Sec to 24 Hours

♦♦ Infrared / Thermal ImagerCalibration -50°C to 550°C

♦♦ RPM / Counter Calibration 0 to 99,999 rpm / 0 Counts to 99,999 Counts

CALIBRATION REPORTING SYSTEMCALIBRATION REPORTING SYSTEM

♦♦ Our calibration report submit to concern lab department and management. Calibration Remarks is highlighted and customer need to service and calibrate to again.
♦♦ MAGI TEX provide to instrument service support also.

♦♦ Calibration reporting model is given below.

MAGI TEX

No.42, R.A.Complex 2nd Floor, Sabari Salai, Kumaran Road, Truppur – 641 601

Call Us: 09942511797, 09578091374